The 'GET' functions must be used for precision TIFF image capture.  There are 3 Get functions available, each with a user defined resolution.  The selected resolutions are stored from session to session, and are selected with the RESOLUTION menu.  To change the resolution assigned to a GET key, do the following:

1. Select the 'GET #'.  1 is the top GET, 2 the second, and 3 the bottom. 
2. Select the X resolution (pixels per scanline) from the 'Resolution' column.
3. Select the most appropriate aspect ratio from the 'Aspect Ratio' column.
4. Repeat steps 1 - 3 to assign other resolutions.
5. Click 'Done'.

The selected resolutions will be in effect until you change them, and will be remembered the next time you run the image collection program.

Tip:  New users often tend to archive images at a much higher resolution than is necessary for most applications.

Would you like to go to the last item under the MISC.... menu, Scan Speed ?

DIGISEM^TM and DRV-2000^TM are a registered trademarks of ELMDAS Company.
Questions or problems regarding this CD should be directed to: jbest@elmdas.com

Copyright © 2001 ELMDAS Co.  All rights reserved.